Sony DAV X1G - Manual (Page 72)

72 GB
• [2:2/R]: the sound of the right channel of
the audio track 2 (monaural)
• While playing a Super VCD on which the audio track
2 is not recorded, no sound will come out when you
select [2:STEREO], [2:1/L], or [2:2/R].
• You cannot change the sound for Super Audio CDs.
To check the audio signal format
(DVD VIDEO, DivX video only)
If you press AUDIO repeatedly during
playback, the format of the current audio signal
(PCM, Dolby Digital, DTS, etc.) appears on the
screen. This function is prohibited on some
discs.
x When playing a DVD VIDEO
Example:
Dolby Digital 5.1 ch
Example:
Dolby Digital 3 ch
x When playing a DATA CD (DivX video) or
DATA DVD (DivX video)
Example:
MP3 audio
Reinforcing bass frequencies
You can reinforce bass frequencies on any
source.
1
Make sure the function is set to “DVD.”
If not, press FUNCTION repeatedly until
“DVD” appears in the front panel display.
2
If a disc is playing, press x to stop,
then press WOOFER.
The SPEAKER SETUP appears.
3
Select the desired subwoofer level
using
X/x, then press ENTER.
The setting is selected and setup is
complete.
Note
1:ENGLISH DOLBY DIGITAL 3 / 2 .1
Surround (L/R)
Front (L/R) +
Center
LFE (Low
Frequency Effect)
2:SPANISH DOLBY DIGITAL 2 / 1
Front (L/R)
Surround
(Monaural)
1: MP3 128k
Bit rate
Using the Sound Effect
AMP MENU
X/x/c
ENTER
WOOFER
With cover opened.
NIGHT
FUNCTION
x
SPEAKER SETUP
SUBWOOFER: 0.0dB
LEVEL: