Sunfire 200 seven - Manual (Page 10)

User's Manual
10
CHAPTER 2
System ConÞ gurations
Unbalanced Connections
If your preampliÞ er has RCA out-
puts, it can be connected to the ampli-
Þ er inputs as shown. The ampliÞ er will
boost the preampliÞ er's output, up to a
level suitable for driving speakers.
This diagram also shows how the
Voltage Source outputs connect to
the input posts of your speakers. (The
Current Source can be used instead,
as shown on the next page).
The following pages show some typical con nec tions that you might make in your in stal la tion. They show how the inputs
and outputs of the Cinema Grand AmpliÞ er are con nected to your pream pli Þ er and speakers.
R = Right Channel
C = Center Channel
L = Left Channel
RS = Right Surround (rear) Channel
LS = Left Surround (rear) Channel
RB = Right Surround Back Channel
LB = Left Surround Back Channel
RS
LS
C
UNBALANCED
PREAMP OU
TPUTS
R
RB
LB
L
+
+
+
+
+
+
+
LOUDSPEAKERS
RB
RS
C
LS LB
L
R
Make sure that the posi-
tive speaker wires do not
touch the negative speaker
wires, or any chassis metal.
This will cause a short circuit and may
damage your ampliÞ er or speakers.
Speaker-level audio outputs
From: AmpliÞ er outputs
To: Speaker input posts
Line-level audio signals
From: PreampliÞ er main RCA outputs
To: AmpliÞ er line-level inputs