Star Micronics Star SCP700 Series - Manual (Page 40)

36
Printer Station Selection (Combo mode only)
<ESC> “+” “A” n
1B 2B 41 n
Print Station Selection
n = 0, “0” : Selects the receipt printer
3, “3” : Selects the slip printer
This command is only valid when it entered at the beginning of a
line. If this command is not set at the beginning of a line, the printer
will ignore the command and continue to print on previously selected
print station.
Character Selection
<ESC> “R” n
1B 52 n
Select international character set
Selects an international character set according to the value of n, as
shown below:
0 n 12, “0” n “9”, “A” n “C”
n = 0, “0” : U.S.A. 1, “1” : France 2, “2” : Germany
3, “3” : England 4, “4” : Denmark 1 5, “5” : Sweden
6, “6” : Italy 7, “7” : Spain 1 8, “8” : Japan
9, “9” : Norway 10, “A” : Denmark 2
11,
“B” : Spain 2
12, “C” : Latin America
Although the international character set can also be selected using a
memory switch, the control code setting is given priority.
<ESC> “/” n
1B 2F n
Select zero style
Causes subsequent zero characters to be printed with a slash when n
is 1, and without a slash when n is 0.
The valve of n can be set to 0(00H) or “0”(30H), or 1(0H) or
“1”(31H).
The default may differ depending on the memory switch setting.
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
≤ ≤ ≤ ≤ ≤ ≤
CODE
HEX
FUNCTION