Solo USA 129HS - Manual (Page 16)

Specification
ENGLISH 16
9. Specification
Engine type SOLO single cylinder two-stroke engine
Engine capacity cm 3 29
Bore / stroke mm 35 / 30
Engine power kW at rpm 1,0 / 7500
Max. permissible speed rpm
no load with cutter
9000
Medium idling speed rpm 2800
Fuel tank capacity l 0,5
Fuel mix ratio: with SOLO 2T engine oil
with other two-stroke oils 1:50 (2%)
1:25 (4%)
Carburettor All-position diaphragm carburettor with primer and
integrated fuel pump
Air filter Foam filter
Ignition Electronically controlled magneto ignition,
maintenance free
Total cutting blade length/Effective cutting length mm 560 / 536
Number of individual cutters top/lower blade 36 / 36
Distance between individual cutters mm 30
Blade stroke mm 15
Blade sharpening angle 45°
Gear reduction 1:4
Total adjustable angle
upward (in the direction of the loop
handle)/downward 135°
90° / 45°
Weighted effective acceleration (ISO 7916)
Handle r.h. side / handle l.h. side m/s 2 3,2 / 5,0
Sound pressure level LP
eg
(EN 27917) dB(A) 90
Sound power level L
Weg
to EN ISO 3744
actual / guaranteed 95% dB(A) 106 / 110
Dimensions mm
Height
Width
Length
220
230
1690
Weight kg
ready to operate (tank empty) 6,2