Setting up the tv automatically – Sony WEGA KV-13FS100 User Manual
Page 26
14
Operating Instructions
Setting Up the TV Automatically
After you have finished connecting your TV, you can perform Auto Program to set up your
channels.
1
Press
to turn on the TV. The Initial Setup screen appears.
2
Press
on the remote control or on the TV front panel to perform Auto Program, or
press
to exit.
To perform Auto Program again
1
Press .
2
Press
g
to highlight Channel Setup (
).
3
Press
f
to highlight Cable. Press
to select.
4
Press
F
or
f
to select On or Off according to how you connected your TV. Press
.
5
Press
f
to highlight Auto Program. Press
to search for channels.
The Initial Setup screen appears each time you turn on the TV until you perform Auto
Program.
After performing Auto Program, press
to exit.
Initial Setup
Auto Program
[CH+]
[CH–]
First please connect
cable / antenna
Exit