Speco Technologies CVC-865DN/24 - Manual (Page 9)

Installation Guide
♦ Installing the lens
1. Remove the lens cap from the front of the camera.
2. If you are using a C mount lens, screw the lens directly into the camera.
3. If you are using a CS mount lens, remove the C mount lens ring adapter.
4. When using a fixed iris lens, switch the shutter control to AES ON.
5. When using a manual adjustable iris lens, switch the shutter control to AES OFF.
6. When using a Video servo auto iris lens or DC servo auto iris lens, switch the shutter control
to AES OFF.
♦ Auto iris lens connection
1. When using auto iris lens (with EE amp)
Set the lens selector to the "Video" position.
PIN
DEFINITION LENS CABLE LEAD
1 DC +12 V Red
2 Video iris White
3 NC -
4 Ground Black
2. DC servo auto iris lens (without EE amp)
Set the lens selector to the "DC" position.
PIN DEFINITION
1 Damping -
2 Damping +
3 Driving+
4 Driving-
To ensure correct lead connection, please refer to the instructions on the lens.
Speco Technologies CVC-614C : CVC-865DN/24
Instruction Manual 9