Siemens C60 - Manual (Page 71)

©
S
ieme
ns
AG
2003, I:\Mobil
\L55\C
60_Lio
n_kJava\en\
fug\D
ru
ck\C60
_Se
tup.fm
left page (70) of C60 Lion en, A31008-H5850-A1-1-7619 (05.09.2003, 08:55)
Setup 70
VAR Langua
ge: English; VA
R issue
da
te
: 3
1-Juli-
2003
Not reachable
Divert occurs if phone is switched off
or is out of range.
No reply
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
Busy
Divert occurs if a call is in progress. If
Call waiting is activated (p. 68), you
will hear the call waiting tone during
a call.
Status check
You can check the current divert sta-
tus for all conditions.
After a short pause, the current situ-
ation is transmitted by the network
and displayed.
p
Condition set.
o
Not set.
s
Display if status is
unknown (e.g. with a new
SIM card).
Clear all
b
All set diversions are cleared.
Additional notes
Note that the divert is stored in the network
and not in the phone (when the SIM card is
changed for example).
Check condition or delete it
First select the condition.
§Select§ Press.
Check status
Select.
Or
Delete Select.
Reactivate divert
The last divert has been stored. Proceed as
with Setting. The stored phone number is
displayed. Confirm phone number.
Edit phone number
Proceed as with "Set divert". When the
stored phone number is displayed:
§Delete§ Press. The phone number is
deleted.
Enter new number and confirm.