Sony SLV-795HF - Manual (Page 62)

Basic Operations 62
3
Push Joystick to / to confirm the setting.
The cursor appears at the beginning of the line. To enter another
setting, move the cursor to the next line and repeat step 2.
4
Press the Joystick (EXECUTE).
5
Press POWER to turn off the VCR.
The TIMER indicator on the VCR lights up and the VCR stands by
for recording.
When using a cable box, leave it on.
Setting the timer manually (continued)
• POWER
Daily/weekly recording
In step 2 above, push Joystick to . to select the recording pattern. Each time
you push Joystick to ., the indication changes as shown below. Push
Joystick to > to change the indication in reverse order.
Tips
• To set the channel, you can also use the CH +/– or number buttons.
• To set the tape speed, you can also use TAPE SPEED.
•
When you are recording a program in the SP mode and the remaining tape becomes
shorter than the recording time, the tape speed is automatically changed to the EP
mode. Note that some noises will appear on the picture when the tape speed is
changed. If you want to keep the tape speed, set AUTO TAPE SPEED to OFF in the
ADVANCED OPTIONS menu (page 73).
•
To lock the VCR after setting the timer, see page 60.
Note
• If you are using cable box control, you cannot select “L1” or “L2.”
the current date n SUN-SAT n MON-SAT n MON-FRI n EVERY SAT .....
n EVERY MON n EVERY SUN n 1 month later n (cycles backward) n
the current date
EXECUTE
EXECUTE