Samsung 400MPN - Manual (Page 71)

This is deactivated when a TV tuner box is installed.
5. MagicInfo
This is activated when a network box is installed in the HN or H model.
6. TV
This is activated when a TV tuner box is installed.
7. BNC
BNC
mode is not supported if the component cable is connected. To use BNC mode, remove the
component cable and connect the BNC cable.
8. Component
Component
mode is not supported if the BNC cable is connected. To use Component mode,
remove the BNC cable and connect the Component cable.
Note
• The direct button on the remote control is the 'SOURCE' button.
• For PC and DVI, this is deactivated if the cable is disconnected.
Edit Name
MENU ENTER Input ENTER Edit Name ENTER
Name the input device connected to the input jacks to make your input source selection easier.
VCR
/ DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver / Game /
Camcorder
/ DVD Combo / DHR / PC
Picture [PC / BNC / DVI / MagicInfo Mode]
Available Modes
• PC / BNC / DVI
Adjusting the LCD Display