Sony FAX-B140 - Manual (Page 108)

9-18
Message Cause Action
NO DATA
NO OGM
REC’D IN MEMORY
TAM MEMORY FULL
TX/RX CANCELLED
TX/RX NO. nnnn
WAIT COOLING
The one-touch speed dialling
button or coded speed dialling
code you entered has not
been registered.
The outgoing message has
not been recorded.
The fax received the
document in memory because
paper or ink ran out, a paper
jam occurred, or the incorrect
BJ cartridge was installed.
Either 50 messages have been
recorded or the total
maximum recording time of
10 minutes has been reached.
You pressed [Stop] to cancel
the transmission.
When the fax sends or
receives a document, it
assigns it a unique
identification number (
nnnn ).
During printing, the BJ
cartridge print head may have
become too hot.
Register the one-touch speed
dialling button or coded speed
dialling code (see pp. 2-10,
2-12).
Record an outgoing message
(see p. 7-1).
Load paper in the multi-
purpose tray (see p. 1-8),
replace the BJ cartridge (see
p. 9-6) or clear the paper jam
(see p. 9-1).
Listen to your telephone
messages and delete any
unnecessary messages.
Alternatively, erase all
telephone messages stored in
the fax memory (see p. 7-7).
If required, try sending again.
Write the number down if you
will need it later.
Allow the fax to cool down. The
fax will resume printing when it
has cooled down.