Soleus Air FTM-25 - Manual (Page 5)

Assembly Instructions
Estimated assembly time: Approximately 5 minutes
Tools required: Phillips screwdriver (not included)
1) Remove the fan and packaging materials from
the box.
2)
Remove the mounting nut from the motor shaft.
3) Position the back grille over the motor shaft,
aligning the holes in the back grille with the two
knobs that protrude from the motor. Make sure
the handle is at the top.
4)
Secure the back grille by screwing on the
mounting nut. Turn clockwise and tighten firmly.
5) Slide the fan blade onto the mounting shaft with
the shaft sleeve facing the motor. Align securing
screw with flat groove in the motor shaft and
tighten with Phillips screwdriver.
6)
Position front grille so logo is horizontal. Secure
the top tab to the back grille. Snap the two
remaining metal clips to complete the assembly.
5