E-14 – Sharp TINSZA625AWZZ User Manual
Page 15
09/11/03
CD-SW440N_EN.fm
E-14
2
1
7
6
5
4
3
2
1
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, etc.) or on the transmitter on the remote control. Condensation
can cause the unit to malfunction. If this happens, leave the power on with
no disc in the unit until normal playback is possible (about 1 hour). Wipe
off any condensation on the transmitter with a soft cloth before operating
the unit.
Remove the iPod, USB memory device and disc from the unit. Then, set
the unit to the power stand-by mode. Carrying the unit with iPod or USB
memory device left docked or discs left inside can damage the unit.
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply voltage
due to lightning, etc.) or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1
Set the unit to the stand-by mode and turn the power on again.
2
If the unit is not restored in the previous operation, unplug and plug
in the unit again, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
Caution:
This operation will erase all data stored in memory including clock, timer
settings, tuner preset, and CD program.
Compact discs are fairly resistant to damage, however mistracking can
occur due to an accumulation of dirt on the disc surface. Follow the
guidelines below for maximum enjoyment from your CD collection and
player.
●
Do not write on either side of the disc, particularly the non-label side
from which signals are read. Do not mark this surface.
●
Keep your discs away from direct sunlight, heat and excessive
moisture.
●
Always hold the CDs by the edges. Fingerprints, dirt or water on the
CDs can cause noise or mistracking. If a CD is dirty or does not play
properly, clean it with a soft, dry cloth, wiping straight out from the
center, along the radius.
In order to ensure proper operation of the CD player, preventative
maintenance (cleaning of the laser pickup lens) should be performed
periodically. Lens cleaners are commercially available. Contact your local
CD software dealer for options.
Periodically wipe the cabinet with a soft cloth and a diluted soap solution,
then with a dry cloth.
Caution:
●
Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It
may damage the cabinet.
●
Do not apply oil to the inside of the unit. It may cause malfunctions.
Troubleshooting chart (continued)
Symptom
Possible cause
●
Device cannot be
detected.
●
Is there any MP3/WMA file
available?
●
Is the device properly connected?
●
Is it an MTP device?
●
Does the device contain AAC file
only?
●
Playback does not start.
●
Is it a copyright protected WMA
file?
●
Is it a false MP3 file?
●
Wrong time display.
●
Wrong file name display.
●
Is Variable Bitrate file being played
back?
●
Is the File Name written in
Chinese or Japanese characters?
Symptom
Possible cause
●
No sound is produced.
No image appears on the
TV/monitor.
●
The iPod is not playing.
●
The iPod is not properly
connected to the unit.
●
Is the AC power cord of the unit
plugged in?
●
The video cable is not properly
connected.
●
The TV/monitor’s input selection is
not properly set.
●
iPod will not charge.
●
Wrong iPod adaptor is used.
●
The iPod is not making full contact
with the iPod connector.
●
The main unit is in stand-by mode.
●
Using 3
rd
generation iPod.
Symptom
Possible cause
●
The radio makes unusual
noises continuously.
●
Is the unit placed near the TV or
computer?
●
Is the FM antenna or AM loop
antenna placed properly? Move the
antenna away from the AC power
cord if it is located nearby.
USB
iPod
Tuner
Condensation
Before transporting the unit
1
Press the ON/STAND-BY button to enter the power stand-by mode.
2
While pressing down the OPEN/CLOSE button, press the POWER
ON/STAND-BY button until “ALL CLEAR” appears.
If problem occurs
Factory reset, clearing all memory
POWER
ON/STAND-BY
Care of compact discs
Maintenance
Cleaning the CD pickup lens
Cleaning the cabinet