Samsung 320P - Manual (Page 16)

28.
29.
1. ON / OFF
Use these buttons to turn the monitor on or off.
2. MAGICNET
MagicNet Quick Launch Button.
- This fuction does not work for this monitor.
3. MDC
MDC Quick Launch Button.
4. LOCK
This button will activate or deactivate all function keys on both the remote control and the monitor
except for the Power and LOCK buttons.
5. MagicNet buttons
- Used for MagicNet.
z Alphanumeric: Used to enter the Internet address.
z DEL : Functions as the backspace.
z SYMBOL : Used to enter the symbols. (.O_-:/)
z ENTER : Used to enter values.
- This fuction does not work for this monitor.
6. +100
Press to select channels over 100.
For example, to select channel 121, press "+100", then press "2" and "1".
- This fuction does not work for this monitor.
7. VOL
Adjusts the audio volume.
>>Click here to see an animation clip
8. MUTE
Pauses (mutes) the audio output temporarily.
Displayed on the lower left corner of the screen.
The audio resumes if MUTE or - VOL + is pressed in the Mute mode.
9. AUTO
Adjusts the screen display automatically.
If you change resolution in the control panel, auto function will be executed.
10. MENU
Use this button to open the on-screen menu and exit from the menu screen or close screen
adjustment menu.
11. ENTER
Activate a highlighted menu item.
12. PRE-CH
This button is used to return to the immediately previous channel.
- This fuction does not work for this monitor.
13. CH/PAGE
Selects channels or page.
- This fuction does not work for this monitor.