Standard Horizon CP150C - Manual (Page 45)

GPS Chart 150C Page 47
This operation will erase all Marks, Routes, stored track plots and Destinations. It will
also return all selections (Input Data Format, Autopilot selection, etc.) to original
default values. To confirm clear RAM press “ENTER” again (but if at this time you do
not wish to clear RAM press “CLEAR”).
3.14.0.1 DIM Menu
To select the desired value for brightness and keypad light.
Figure 3.14.0.1 - DIM Menu
Contrast
Each time you move the ShuttlePoint knob to right, the screen will decrease
brightness, move it to the left to increase brightness.
Backlight
The second option allows to set the backlight. Operates in similar mode as Contrast.
3.14.0.2 Cartridges
To check the C-CARD and its connector.
Figure 3.14.0.2 - C-CARD Menu
Background ROM
To test the WorldWideBackground. If there is not a malfunction, the code of the
Background and the message "OK" are shown, but if the Background is defective the
message "Faulty" is shown.