Samson D1500 - Manual (Page 2)

D
•
2500
Power supply
Mains voltage ..................... 115 V, 60 Hz, 230 V, 50 Hz
Power consumption ............. 20 W typ.
Fuse .................................. T 630mA for 100- 120 Volt /
T315mA for 220 - 240 Volt
Mains connector ................. Standard IEC receptacle
Dimensions (W x D x H) .................... 19 in. x 10.5 x 3.5
482 mm x 267 x 89
Weight ............................................ 5.1 lb.(2.31 kg)
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES
CLASS B. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MUST NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
D•2500 SPECIFICATIONS
Inputs
Type .................................. electronically balanced
Connector .......................... XLR
Impedance ......................... 22 kΩ at 1 kHz
Max. input level ............................... +22
AIO1 .................................. +14dBu
AIO2 .................................. +20dBu
Outputs
Type .................................. electronically balanced
Connector .......................... XLR
Impedance ......................... 100 Ohms at 1 kHz
Max. output level
AIO1 .................................. +14dBu
AIO2 .................................. +20dBu
Frequency Response ......................... 10 Hz to 35 kHz (-1dB)
@ 96 kHz sampling rate
Signal-to-noise-ratio
AIO1 .................................. Noise floor (unweighted)
< -92 dBFS (-78 dBU)
Noise floor (A-weighted)
< -100 dBFS (-86 dBU)
AIO2 .................................. Noise floor (unweighted)
< -106 dBFS (-86 dBU)
Noise floor (A-weighted) <
-112 dBFS (-92 dBU)
THD ................................................ 0.005 % typ. @ +4 dBu,
1 kHz, unity gain
Digital Processing
Converter ........................... 24-bit Delta-Sigma,
64/128-oversampling
Sample Rate
AIO1 & AIO2 ...................... 32, 44.1, 48, 64, 88.2, 96 kHz
DIO1 .................................. 96 kHz Type digital
31-band equalizer
Frequency Range .............................. 20 Hz to 20 kHz, 31 bands
on ISO standard frequencies
Display
Type .................................. Custom LCD for parameter
control
Memory
Presets .............................. 100 memory locations, 99
user programable
Midi Interface
Type .................................. 5-pin. DIN jacks In/Out/Thru
BACK PANEL
482.6mm
430mm
255.4mm
88mm
430mm
255.4m
m
TOP
FRONT
SIDE
PRODUCT SPECIFICATION SHEET
SERIES DESCRIPTION CATEGORY
D•CLASS DIGITAL EQUALIZER DIGITAL SIGNAL PROCESSING
GENERAL DESCRIPTION (continued)
D•2500 features an advanced 32-bit point floating processor
DSP interface and high quality converters with 24-bit audio
resolution and sample rates up to 96kHz for pristine audio
quality. You can even upgrade your D•Class units to premium
Analog-to-Digital and Digital-to-Analog I/O (Input/Output)
converter boards, keeping your D•Class system up to date
with the best technology and sound, far into the future.
The D•2500 is perfectly at home in the studio or on the
road. The fact is, you would use the D•2500 equalizer for its
precise filtering and superb audio quality alone, but you get
the power of all the features, and then some, expected from
a high quality digital equalizer. Whether you are a recording
or a live sound engineer you’ll get a better sound using the
D•2500 Digital Equalizer!
FEATURES
> The D•2500 is a stereo or two channel digital equalizer
with each channel providing 31 bands of equalization,
each frequency band representing 1/3 of an octave, on ISO
standards, in the 20 Hz to 20 kHz range.
> The front panel provides 32 analog 45mm LED faders for
instant filter adjustment and true analog feel.
> Custom Liquid Crystal Display is easy to read and provid es
critical paramter information.
> Advanced 32 bit floating point DSP with high-end, 24 Bit
96K sample rate Analog-to-Digital and Digital-to Analog
converters provides a pristine sound quality with low
distortion and wide dynamic range.
> Variable Q Filters with programmable bandwidth (1/4,
1/3 and 1/2 octave) ensures that the filter of the selected
frequency area stays the same even when approaching
maximum boost or attenuation. Plus, Auto Bandwidth
allows individual filters to have different filter cues. As a
result, the frequency response of the D•2500 will as close
as possible to your faders settings.
> Automated Feedback recognition, indication and suppression
(Manual or Auto mode) with Automated Filter Restoration.
> The D•2500’s fader can be set for either 3, 6 or 12 dB of
gain and attenuation for each of the frequency bands.
> An onboard programmable Delay is included for time
aligning speakers.
> The D•2500 offers programmable High and Low Pass Filters
for setting contour curves or for removing low-end stage rumble.
> To help keep the over all system noise level low, the
D•2500 includes a programmable Noise Gate with variable
threshold control.
> An added layer of speaker protection is accomplished by using
the D•2500’s programmable brick wall Limiter.
> The programmable Enhancer can be used to add extra highs
or as a noise reduction system by lowering the high frequency
bands when no high end content is present.
> Equalization curves plus all digital effects can be stored or
recalled using the 99 Preset Locations.
> Configure larger systems using multiple D•Class units which
communicate over standard MIDI, or with Samson’s optional
high-speed D•Net interface card.
> Electronically balanced XLR inputs and outputs.
> Internal power supply ensures reliability and trouble-free operation.
> Standard 19”, 2 rack-space design for easy integration into
any traveling or fixed installation audio system.
> Aluminum extruded front panel and steel chassis makes the
D•2500 eminently road-worthy.
> Three year extended warranty.
ARCHITECT’S & ENGINEER’S SPECIFICATIONS
The D•2500 shall be a stereo 31 band digital graphic equalizer
for the purpose of equalizing an audio system. It shall have 31
faders to adjust the levels of the 31 bands of audio. The D•2500
shall also have automatic feedback reduction filters, gate, delay,
enhancer, HP/LP filters and a limiter for the purpose of equalizing
and balancing an audio system. The D•2500 shall have balanced
XLR inputs and outputs. The inputs and outputs shall be on
cards so that they can be removed and upgraded. A slot shall also
be provided for a D•Net card so that the unit can communicate
with other D•Class units at a faster speed than from the included
midi connections. There shall be 99 digital memory locations to
store and recall user program information. The D•2500 is one
of a series of 3 digital processors that can operate separately or
together as a single piece of analyzing equipment.
FRONT PANEL