Stanton M.207 - Manual (Page 23)

Playing Back a Sample
20
4.5.3 Playing Back a Sample
Figure 4.29
To play a sample, touch one of the areas in the FXGlide™ Button Strip. (Figure 4.29)
When a sample is playing, the PLAY/STOP button will blink Figure 4.30 (1). There are 2
modes for sample playback – LOOP or ONE SHOT. To verify in which mode the sampler
is currently in or to select the sample playback mode press the PARAM button (2).
Figure 4.31
You can use the top 2 or bottom 2 buttons in the FXGlide™ Button Strip to select playback
modes. The top 2 buttons put the sampler into LOOP mode, and the bottom 2 put it into
ONE SHOT mode. (Figure 4.31)
Figure 4.30
4.5.4 Erasing a Sample
Figure 4.32
In either Auto or Manual Sampling, hold down the RECORD button Figure 4.32 (1) and
tap a button in the FXGlide™ Button Strip to erase the corresponding sample (2).
If a sample existed in that slot, you will see the word ERASE appears in the LCD screen.
If the slot was empty, the word ERASED will show instead.