Samsung SV-6313X - Manual (Page 22)

You can connect other audio/video equipment to your VCR using
audio/video cables if the appropriate outputs are available on the
equipment chosen.
Examples: ◆ You wish to copy a video cassette with the help of a
second VCR (see page 40).
◆ You wish to play back and/or copy pictures taken
with a camcorder (see page 40).
☛
◆ Make sure that both the television and the VCR are
switched off before connecting the cables.
1 Connect one end of the RCA audio/video cable into the VIDEO
socket on the front of the VCR.
2 Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
3 Connect one end of the RCA audio cable into the AUDIO sockets
on the front of the VCR.
➢
Take care to respect the colour coding of the left and right
channels.
4 Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
GB
Connecting an RCA Audio/Video Input Cable
★
(SV-635X/SV-631X/
SV-6315X/SV-6313X/SV-530X/SV-435X/SV-235X Only)
39 38
Using the Tape Counter
CLR/RST F.ADV
INPUT INDEX
MEN REPEAT
0:00:00
VCR
DISP./
VOL PROG/TRK
IPC
DISPLAY
TRK PROG
2 2
2
The tape counter:
◆ Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
◆ Is reset when a cassette is inserted in the VCR
◆ Allows you to find the beginning of a sequence easily
☛
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1 Insert a cassette in your VCR.
2 To set the tape counter to zero at the beginning of a sequence:
◆ Press DISP./ or DISPLAY twice to display the counter
◆ Press CLR/RST when you want to set the tape counter to
zero
3 To fast-forward or rewind to the sequence at which the counter
was set to zero, simply press
➛➛ or ❿❿ .
Result: The VCR stops automatically when the counter
reaches zero.
➢
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 16).
Press DISP./ or DISPLAY:
◆ Once to display the current function, programme
number, recording speed
★ (SV-635X/SV-631X/
SV-6315X/SV-6313X/SV-530X/SV-435X/SV-431X only),
date, time and counter
◆ Twice to display the counter only
◆ Three times to display the time remaining on the
cassette
◆ Four times to clear the display
EJECT STANDBY/ON
VIDEO AUDIO
AUX
1 3
★ (SV-435X/SV-235X)
★ (SV-635X)
★ (SV-631X/SV-6315X/SV-6313X/
SV-530X/SV-435X/SV-431X/SV-235X/
SV-231X/ SV-2315X/SV-2313X)
VIDEO L AUDIO R
AUX
VIDEO L AUDIO R
AUX
1
3 3
★ (SV-635X/SV-631X/SV-6315X/SV-6313X/SV-530X)