Scientific Atlanta DPC2203 - Manual (Page 6)

Data Sheet
Page 6 of 16
Specification Value
Call Feature Support ● Caller ID
● Call Waiting with Caller ID
● Cancel Call Waiting
● Call Conferencing (3-way calls)
● Configurable hook flash support
● Distinctive Ringing (Configurable for up to 11 ring patterns per phone line)
● Ring splash
● Stutter dial tone
● Off hook warning tone
● Open Switch Interval support to enhance answering machine compatibility
● Configurable star codes
● Euro/US hook-flash type
● Call transfer
● Message Waiting Indicator
● Warm Line
● Call Forwarding Unconditional
● Call Forwarding on Busy
● Call Forwarding No Answer
● Call return
● Redial Call
● Automatic redial
● Other call features available with compliant CMS or gateway
Telephone Ring Loading Full 5 REN support on each phone line (10 REN total)
Ring Signal Configurable balanced ring with configurable DC offset
Max Phone Line Distance Supports up to 1000 ft of AWG26 wire (0.4 mm) on each phone line. Supports operation with
typical in-home telephone wiring
Country-Specific
Telephone Parameters
Supported United States, Japan, United Kingdom, Germany, France, Belgium, Netherlands, Finland, Italy,
Switzerland, Sweden, Denmark, Brazil, ETSI 101 909-18
High Speed Data
Simultaneous Access Bridged Ethernet and USB data ports
Cable Modem Access
Protection Software based standby feature disables bridging to the WAN when enabled
Max CPE Configurable up to 64 CPE devices (1 USB and 63 Ethernet)
RF Downstream
Input Frequency Range Models other than DPC2203C2: 88 to 860 MHz
For DPC2203C2 only: 54 to 860 MHz
Tuner Frequency Range 88 to 860 MHz
Demodulation 64 QAM or 256 QAM
Maximum Data Rate 30 Mbps for 64 QAM and 43 Mbps for 256 QAM
Bandwidth 6 MHz
Operating Level Range -15 to +15 dBmV
Input Impedance 75 ohms
RF Upstream
Frequency Range 5 to 42 MHz
5 to 55 MHz (Japan)
Modulation QPSK
8 QAM
16 QAM
64 QAM
128 QAM TCM