Sun Microsystems SG-XPCIE1FC-EM8-Z - Manual (Page 55)

29
C H A P T E R
4
Known Issues
This chapter contains any known issues with the HBA.
Reboot Fails on the SPARC Enterprise
M8000 System (6728135)
On the SPARC Enterprise M8000 system, if you use the stmsboot command to
provide dual paths to the boot device, on occasion the boot device is not found and
the reboot does not succeed.
At the console, the following message will be printed:
Can't open boot device
Workaround: When this occurs, retry the boot operation. The system will now
reboot as expected.