Samsung Digimax A55W - Manual (Page 33)

33
Flash ( )/ Left button
[Selecting the Auto flash]
18
Flash range (Unit : m)
When the menu is displayed on the LCD monitor, pressing
the LEFT button makes the cursor shift to the left tab.
When the menu is not displayed on the LCD monitor, the
LEFT button operates as the FLASH ( ) button.
Selecting the flash mode
1. Press the M (Mode) button to select a Recording mode
with the exception of Movie clip mode (p.20).
2. Press the Flash button until the desired flash mode
indicator displays on the LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
If you press the shutter button after selecting the Auto, Fill-in, Slow sychro flash, the first
flash fires to check the shooting condition (Flash range and Power ratio of flash).
Do not move until the second flash fires.
Using the flash frequently will reduce the life of the battery.
Under normal operating conditions the charging time for the flash is normally within 5
seconds. If the battery is weak, the charging time will be longer.
During the continuous shot, AEB and movie clip mode, the flash function will not operate.
Take photographs within the flash range.
The image quality is not guaranteed if the subject is too close or highly reflective.
INFORMATION
Normal
WIDE TELE WIDE TELE WIDE TELE
0.6~3.0 0.6~2.0 0.25~0.6 0.5~0.6 0.25~3.0 0.5~2.0
Macro Auto macro
ISO
AUTO