Samsung 670 - Manual (Page 5)

5
01
Getting Started
English
Install the Stand
See separate guide for installing the stand.
Stand (1EA) Guide Stand (1EA) Screws (9EA)
Follow the steps below to connect the TV to the stand.
1. Connect the Guide Stand to the Stand using five screws (M4 X L12) as shown.
1
2
2. With your TV upright, connect the TV to the Stand. 3. Fasten two screws (M4 X L12) at position 1, and then
fasten two screws (M4 X L12) at position 2.
✎
NOTE
x Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
x Make sure that at least two persons lift and move the LCD TV.
x Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to
one side.
(M4 X L12)
Top view
Front
Rear
Rear
Screws (M4 X L12)
Screws (M4 X L12)
Guide Stand
Stand
or
[LC670_USA]BN68-02870A-03Eng.indb 5 2010-06-25 오후 5:57:43