Sony VGX-XL2 - Manual (Page 92)

84
Note : Loading Media Note: It may take up to 60 seconds for Media Center to scan each disc. It is
recommended to insert each disc into the changer, and then let them all scan one after the other. For
additional information, go to the
Manage Discs topic in My Changer .
Loading Media Changer Unloading Media Changer
1 Make sure the Changer/Recorder is
properly connected to the Personal
Computer and is turned on.
Note : When loading discs, make
sure that the label is facing to the
right of the slot.
2 To load a single disc, press the
Load button once and insert the
disc. To load multiple discs, press
the
Load button twice and insert
each disc in the slot one at a time.
The changer keeps rotating open
slots until all are filled or no until no
disc is inserted after 15 seconds.
3 Once the discs have been inserted,
they must be scanned by Media
Center before they can be viewed.
Go to
More Programs and select
Manage Discs or to My DVDs
4 Click Yes on the NEW DISCS
FOUND message to update your
library with the new disc information.
To eject discs using Media Center:
1 From Media Center, go to My
Changer and select Manage Discs .
2 Select the Eject button associated
with the disc you want to eject.
To eject discs manually:
1 Press the Eject button one time to
eject the last inserted disc.
or
2 Press the Eject button two times to
eject all discs in the changer slots. If
the disc is not removed from the slot,
the eject process will time out and
stop after approximately 10 seconds.
This will not eject the disc in the
changer optical drive. You must go to
Media Center to eject the last disc.
See steps 1 through 2 of
To eject
discs using Media Center .