Built-in stitches, Stitch “a” - straight stitch – Simplicity SA2200 User Manual

Page 18

Advertising
background image

17

BUILT-IN STITCHES

ZIPPER INSERTION

The zipper foot is designed to allow you to sew close to

raised edges. Easily and accurately insert zippers and

covered cording or piping in seams using the zipper foot.

Remove the presser foot holder. Attach the zipper foot to

the presser foot bar. Raise the needle to the highest posi-

tion. The foot can be adjusted to the left or right side of

the needle by loosening the screw on the foot, sliding

the foot and re-tightening the screw [Fig. 1].

To sew the right side of the zipper, adjust the zipper foot so

it is on the right side of the needle and the needle clears

the notch on the left side of the zipper foot [Fig. 2].

To sew the left side of the zipper, adjust the zipper foot so

it is on the left side of the needle and the needle clears

the notch on the right side of the zipper foot [Fig. 3].

Use ONLY the straight stitch with this foot.

PIPING INSERTION

Add decorative detail to home decorating projects and

create designer fashion looks by inserting covered cord

or purchased piping within seams.

Attach the zipper foot and adjust the sliding foot to the

right side of the needle. Baste the cord or piping to the

right side of one fabric piece along the seamline, using

the longest stitch length setting of 4 [Fig. 4].

Place the second layer of fabric with the first layer, right

sides together. Shorten the stitch length to 3 and stitch

the seam close to the piping [Fig. 5].

NARROW HEMMING

The narrow hem foot actually rolls the fabric edge to create

a narrow hem for napkins, ruffles, scarves, and dainty hem

finishes on clothing.

Fold a 1/8” double hem to the wrong side of fabric, for

about 2” along the beginning of the hem [Fig. 6]. Place

the rolled edge of the hem under the presser foot. Lower

the foot and take several stitches. Stop with the needle

in the fabric [Fig. 7]. Raise the foot. Pick up the fabric

edge and roll it into the scroll of the foot. Lower the foot

and begin stitching slowly. Hold the fabric up and

slightly to the left as you sew [Fig. 8]. Practice makes

perfect with this technique!

STITCH “A” - STRAIGHT STITCH

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 7

Fig. 8

Fig. 6

Narrow hem

STITCH

STITCH WIDTH

STITCH LENGTH

PRESSER FOOT

A

0

3

Zipper

STITCH

STITCH WIDTH

STITCH LENGTH

PRESSER FOOT

A

0

3

Zipper

STITCH

STITCH WIDTH

STITCH LENGTH

PRESSER FOOT

A

0

3

Hemmer

Advertising