Samsung VC240 - Manual (Page 25)

Using the product 3-4
If the OSD is on the screen, use this button to select a function
When the OSD is not on the screen, use this button to switch the input signal (PC/DVI/VC).
When you switch the input signal by pressing the [
/SOURCE] button or when you turn the
product on, a message displaying the selected input signal appears at the top left of the
screen.
To select Digital (DVI) mode, you must connect the product to your PC with a DVI
cable.
Press this button to turn the product on or off.
Power LED This LED is turned on when the product works normally.
The power LED can be found above the buttons on the bottom of the monitor.
For information about the power-saving function, refer to the power saving function
section of the product specifications. When not using the product for a long time,
unplugging the power cord is recommended to minimize power consumption.
ICON DESCRIPTION