Sony Trinitron KV-14V4D - Manual (Page 5)

Getting Started 5
GB
1
2
Step 2 — Connecting the Aerial
Connecting an Indoor Aerial
If your local VHF/UHF signal is strong, an indoor aerial can be used to
obtain a clear picture. Connect the supplied monopole aerial as follows.
1 Insert the aerial until it clicks.
2 After turning on the video TV, adjust the aerial for best reception.
Connecting an Outdoor Aerial
For better TV reception and recording with clear video picture, connect an
outdoor aerial to your video TV.
To connect a VHF aerial or a combination
VHF/UHF aerial—75-ohm coaxial cable (round)
Attach an IEC aerial connector to 75-ohm coaxial cable.
Plug the connector into the
(aerial) socket of the video TV.
To connect both VHF and UHF aerials
Attach the aerial cable ends to the VHF/UHF mixer (not supplied).
Plug the mixer into the
(aerial) socket of the video TV.
Rear
or
On a wall
VHF/UHF aerial
After connecting the aerial, connect the mains lead to a wall outlet.
Rear
300-ohm twin-lead cable
VHF/UHF mixer
75-ohm coaxial cable
UHF aerial VHF aerial