Sun Microsystems Cisco MDS 9222i - Manual (Page 3)

1
Cisco MDS 9222i Switch and
18/4-Port Module Hardware
Release Notes
Read this document so that you are aware of the requirements and issues that can
affect the installation and operation of the Cisco Multilayer DataCenter Switch
(MDS) 9222i Multiservice Modular Switch (MDS 9222i) and Cisco MDS 18/4-port
Multiservice Module (MSM-18/4) hardware in a Sun storage area network (SAN).
Note – Sun is not responsible for the availability of third-party web sites mentioned
in this document. Sun does not endorse and is not responsible or liable for any
content, advertising, products, or other materials that are available on or through
such sites or resources. Sun will not be responsible or liable for any actual or alleged
damage or loss caused by or in connection with the use of or reliance on any such
content, goods, or services that are available on or through such sites or resources.
This document contains the following sections:
■ “Product Features” on page 2
■ “Supported Software” on page 2
■ “Supported Hardware” on page 5
■ “Downloading and Installing Patches” on page 8
■ “Related Documentation” on page 9
■ “Service Contact Information” on page 9