Scientific Atlanta AT8550TM - Manual (Page 14)

14
Change VCR/VOD Programming
Your remote is originally programmed in one of the following ways:
• The Rewind, Play, Fast Forward, Stop, Pause, and Record keys (the transport keys)
are programmed, by default, to transmit the codes for the Explorer
® 8000 ™ series
Home Entertainment Server video-on-demand (VOD) or digital video recorder
(DVR) functions when in Cable (CBL) mode.
• The transport keys control different devices, depending on the mode key you press.
You can choose to override the default settings for the transport keys so that the
transport keys operate a different device when you have selected CBL mode.
Try your remote to see how the transport keys currently work. If you want to change the
settings for the transport keys, complete the procedure that fits your needs.
Changing VCR/VOD Programming
(Program Code 9 9 9)
1. Press and hold CBL and SELECT until all mode keys blink twice.
2. Press 9 9 9. The CBL key blinks twice.
3. Press the mode key (VCR or DVD) associated with the device you want the transport
keys to now control. All mode keys blink three times.
Results:
• The transport keys now always control the device associated with the mode you
selected in this procedure (DVD or VCR).
• Pressing PLAY starts the VCR, the DVD, or the device that has been
reassigned to AUX.
• In AUX mode, the remote always controls channels for the device assigned to the
AUX key.
Restoring Default VCR/VOD Settings
(Program Code 9 9 9)
1. Press and hold CBL and SELECT until all mode keys blink twice.
2. Press 9 9 9. The CBL key blinks twice.
3. Press CBL. All mode keys blink three times.
Result: The transport keys are restored to their default settings.
Example: Pressing PLAY in CBL mode starts the DVR.