Adjusting the sound characteristics, Quickly attenuating the sound, Changing the sound and display settings – Sony CDX-CA900X User Manual

Page 17: Menu, 17 adjusting the sound characteristics

Advertising
background image

17

Adjusting the sound
characteristics

You can adjust the bass, treble, balance, fader,
and subwoofer volume.

1

Select the item you want to adjust by
pressing

(SOUND)

repeatedly.

Each time you press (SOUND), the item
changes as follows:

BAS (bass)

t

TRE (treble)

t

BAL (left-right)

t

FAD (front-rear)

t

SUB (subwoofer volume)

2

Adjust the selected item by pressing

<

or

,

.

Note
Adjust within 3 seconds after selecting the item.

Quickly attenuating the
sound

(With the rotary commander or the card
remote commander)

Press

(ATT)

.

“ATT·······on” appears in the display
momentarily.

To restore the previous volume level, press
(ATT) again.

Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).

Changing the sound and
display settings

— Menu

The following items can be set:

(Set Up)

• Clock (page 9)
• Beep — to turn the beeps on or off.
• AUX-A (page 21) — to turn the AUX source

display on or off.

(Display)

• D.Info (Dual Information) — to display the

clock and the play mode at the same time (on).

• SA (Spectrum Analyzer) (page 21) — to

change the display pattern of the sound signal
level.

• Dimmer — to change the brightness of the

display.
– Select “Auto” to dim the display only when

you turn the lights on.

– Select “on” to dim the display.
– Select “off” to deactivate the Dimmer.

• Contrast — to adjust the contrast if the

indications on the display are not recognizable
because of the unit’s installation position.

• A.Scroll (Auto Scroll)

– Select “on” to scroll all automatically

displayed names exceeding 12 characters.

– When Auto scroll is set to off and the disc/

album/track is changed, the disc/album/track
name or ID3 tag does not scroll.

• Demo

– Select “on” to activate the Demo display.

The Demo display will appear about 10
seconds after the unit is turned off.

(Play Mode)

• Local on/off (Local seek mode) (page 14)

– Select “on” to only tune into stations with

stronger signals.

• Mono on/off (Monaural mode) (page 14)

– Select “on” to hear FM stereo broadcasts in

monaural. Select “off” to return to normal
mode.

• IF Auto/Wide (page 14)

continue to next page

t

Advertising