Samsung 400CXN - Manual (Page 101)

2. Hard of hearing
Note
• If the programme you are watching does not support the "Hard of hearing" function, "Normal"
automatically activates even though "Hard of hearing" mode is selected.
Audio Format
D.MENU → → → →[Digital Menu] → ENTER→ → →[Setup]→ENTER → → → →
→ → [Audio Format] → ENTER
→ , → ENTER
You can only hear Dolby Digital sound through the audio receiver connected through an optical cable.
You can only hear PCM sound through the main speaker. When sound is emitted from both the main
speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between
the main speaker and the audio receiver. In this case, use the internal mute function.
1. PCM
2. Dolby Digital
Note
• The Audio Format appears according to the broadcasting signal.
• Dolby digital sound is only available when the TV is connected with an external speaker using an
optical cable.
Audio Description
D.MENU → → → →[Digital Menu] → ENTER→ → →[Setup]→ENTER → → → →
→ → → [Audio Description] → ENTER
→ , → ENTER
Note
• "Audio Description" is active when "Audio Format" is set to "PCM".
This is an auxiliary audio function that provides an additional audio track for visually challenged
persons. this function handles the Audio Stream for the AD (Audio Description), when it is sent along
with the Main audio from the broadcaster. Users can turn the Audio Description On or Off and control
the volume.
Adjusting the LCD Display