Soundstream Technologies LW1.350 - Manual (Page 2)

A Hi/Low Selector switch is also provided allowing you to choose either the low
range (50Hz-650Hz) or the high range (500Hz-6.5KHz).
SPECIFICATIONS
Signal / noise Ratio
HPF
LPF
Input Voltage Range
High Impedance RCA/LINE
Level Input Impedance
>92dB
10Hz - 30KHz
50Hz - 650Hz
50Hz - 650Hz
11 - 16 Volts DC
47K Ohms
POWER RATINGS & FUSE
MODEL
LW2.240
LW4.480
LW5.830
4 ohm STEREO
60W x 2
60W x 4
70W x 4+180W x 1
2 ohm STEREO
120W x 2
120W x 4
140W x 4+270W x 1
4 ohm BRIDGED
240W
480W
280W x 2+270W x 1
30A
30A x 2
30A x 3
FUSE
Frequency Response +1.0db
4 3
FEATURES
VARIABLE BASS EQ. CONTROL
DRIVE DELAY II (2 second) CONTROL CIRCUITRY
THERMAL, SHORT-CIRCUIT / OVERLOAD PROTECTION SYSTEMS
2 OHM STEREO STABLE / 4 OHM MONO
PWM MOSFET SUPPLY
POWER & PROTECTION INDICATORS
4 - POSITION SELECTABLE CROSSOVER (Hp - Lp - Bp & Full).
INFINITELY VARIABLE X-OVER POINT (50 - 650) /500 - 6.5k (X10)
18 db BASS BOOST @ 45 Hz (Switchable IN/OUT)
CROSSOVER Range SELECTOR SWITCH (Normal / x10)
PLATINUM TERMINAL STRIPS & RCA JACKS
HEAVY-DUTY (Bright) ALUMINUM ALLOY - HEATSINK
HIGH (Speaker) OR LOW (RCA) LEVEL INPUTS.
PHANTOM (5th) CHANNEL FOR POWERING SUB / CENTER CHANNEL (5 Channel Model).
SOFT TURN-ON / OFF (No pop ).
LW1.350 300W x 1 20A x 2
LW4.580 75W x 4 150W x 4 600W 30A x 2
PDF created with pdfFactory Pro trial version www.pdffactory.com