Silicon Valley Peripherals SiliconDrive SSD-D0120PI-5000 - Manual (Page 22)

ATA C OMMANDS SSD-D XXX ( X )-5000 D ATA S HEET [P RELIMINARY ]
S ILICON S YSTEMS P ROPRIETARY
This document and the information contained within it is confidential and proprietary to SiliconSystems, Inc.
All unauthorized use and/or reproduction is prohibited.
5000D-00DSR PRELIMINARY P AGE 16 M ARCH 16, 2009
87 4000h Command set/feature default:
15 Shall be cleared to 0
14 Shall be set to 1
5 0 = General Purpose Logging feature set is
not supported
3 0 = Media Card Pass Through Command
feature set is disabled
2 0 = Media serial number is invalid
1 0 = SMART self-test is not supported
0 0 = SMART error logging is not supported
88 XX3Fh
13 1/0 = UDMA mode 5 is selected/not selected
12 1/0 = UDMA mode 4 is selected/not selected
11 1/0 = UDMA mode 3 is selected/not selected
10 1/0 = UDMA mode 2 is selected/not selected
9 1/0 = UDMA mode 1 is selected/not selected
8 1/0 = UDMA mode 0 is selected/not selected
5 1 = Ultra DMA mode 5 and below are
supported
4 1 = Ultra DMA mode 4 and below are
supported
3 1 = Ultra DMA mode 3 and below are
supported
2 1 = Ultra DMA mode 2 and below are
supported
1 1 = Ultra DMA mode 1 and below are
supported
0 1 = Ultra DMA mode 0 is supported
89 0000h - Time required for security erase unit
completion
90 0000h - Time required for Enhanced security erase
completion
91 0000h - Current advanced power management value
92 0000h - Master Password Revision Code
Table 10: IDENTIFY DEVICE Information (Continued)
Word Value Description