SBC comm 52609X02 - Manual (Page 26)

Installation Guide for Customer Self-Install: Efficient Networks® 5260, Windows 95/98Me/2000 Page 25
©2001 SBC Advanced Solutions, Inc. All rights reserved.
DESKTOP For the Internal Ethernet Adapter Card
• Open the computer case using your computer manufacturer’s instructions and then
remove the screw holding card in place.
• Carefully remove the Ethernet Adapter card from the PCI slot.
LAPTOP For the PC Card
• Press the release button (consult your computer manufacturer’s Owner’s Manual if
you don’t know where this button is located).
• Slide the PC Card completely out of the slot.
7. Reinstall the card following procedures in Step 5. Desktop users should try a different PCI
slot, if possible.