Assembling your keyset – Samsung DS-5000 User Manual
Page 16
Advertising
9
ASSEMBLING YOUR KEYSET
•
Place the keyset face down on a flat surface.
•
Insert notched ends of the support bracket into the channels located in the
upper section of the bottom panel. Push towards the top of the keyset to lock
in.
•
Plug the handset cord into the jack marked with the symbol.
•
Route the handset cord out the RIGHT side of the keyset as you look at it face
down.
•
Plug the four-conductor line cord, from the wall, into the jack with the
symbol on the bottom of the keyset.
ds_phones.qxp 5/11/2006 8:07 AM Page 15
Advertising