Sharp MX-PB12 - Manual (Page 29)

27
ENGLISH
INSTALLING THE PRINTER STATUS
MONITOR
Printer Status Monitor is a printer utility that allows general users to check the current status of the
machine on their computer screen, such as whether or not the machine is ready to print. The Printer
Status Monitor shows error information such as paper misfeeds, printer configuration information
(whether or not a finisher is installed, etc.) as an image, the paper sizes that can be used, and the
amount of paper remaining.
Supported operating systems: Windows 2000 * /XP * /Server 2003 * /Vista * /Server 2008 *
* Administrator's rights are required to install the software.
When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION
SCREEN (FOR ALL SOFTWARE)" (page 7), perform the steps below.
1 Click the [Printer Status Monitor]
button.
2 Follow the on-screen
instructions.
3 When the installation completed
screen appears, click the
[Finish] button.
To have the Printer Status Monitor start
automatically when your computer is started,
select the [Add this program to your Startup
folder] checkbox
and click the [Finish]
button.
4 Click the [Close] button in the
window of step 1.
This completes the installation.
For the procedures for using the Printer Status Monitor, see the Help file. Follow these steps to view
the Help file:
Click the Windows [start] button, select [All Programs] ([Programs] in Windows 2000), select [SHARP
Printer Status Monitor] and then select [Help].
The Printer Status Monitor cannot be used in the following situations:
• When the machine is connected by a USB cable.
• When printing to the machine using the IPP function.
Note
After the installation, a message
prompting you to restart your
computer may appear. If this message
appears, click the [Yes] button to
restart your computer.
Note
Setup_multi.book 27 ページ ２００９年７月７日 火曜日 午後２時８分