Sony HTD-710SS - Manual (Page 28)

masterpage:Left
lename[D:\Sony SEM
5\Revision_HTR210SS\J9050956_2599618112HTR210SS_GB\2599618112\GB06ADV_HTR-
10SS-CEL.fm]
28 GB
model name1[HTR-210SS]
[2-599-618-11(2)]
Using the SET UP menu to
adjust the receiver
You can adjust various receiver settings using
the SET UP menu.
1
Press MAIN MENU repeatedly to select
“
SET UP ”.
2
Press or repeatedly to select the
parameter you want to adjust.
For details, see “SET UP menu parameters”
below.
3
Press or repeatedly to select the
setting you want.
The setting is entered automatically.
4
Repeat steps 2 and 3 to adjust the other
items.
SET UP menu parameters
The initial setting is underlined.
x VD2-XXXX
(Audio input mode for VIDEO 2 input)
Lets you select the audio input mode for VIDEO 2
input.
• AUTO
Gives priority to digital signals when there are both
digital and analog connections. If there are no digital
signals, analog is selected.
• OPT
Specifies the digital audio signals input to the
DIGITAL VIDEO 2 OPT IN jack.
• ANLG
Specifies the analog audio signals input to the
VIDEO 2 AUDIO IN (L/R) jacks.
x CD-XXXX
(Audio input mode for SA-CD/CD input)
Lets you select the audio input mode for SA-CD/CD
input.
• AUTO
Gives priority to digital signals when there are both
digital and analog connections. If there are no digital
signals, analog is selected.
• OPT
Specifies the digital audio signals input to the
DIGITAL SA-CD/CD OPT IN jack.
• ANLG
Specifies the the analog audio signals input to the
SA-CD/CD AUDIO IN (L/R) jacks.
x A.V.SYNC. X
(Time alignment)
• Y (Yes) (Delay time: 68 ms)
The audio output is delayed so that the time gap
between the audio output and visual display is
minimized.
• N (No) (Delay time: 0 ms)
The audio output is not delayed.
Notes
• This parameter is useful when you use a large LCD
or plasma monitor or a projection TV.
• This parameter is valid when you use a sound field
selected with the 2CH or A.F.D. button except when
PCM 96 kHz signals are input.
x DUAL XXX
(Digital broadcast language selection)
Lets you select the language you want to listen to
during digital broadcast. This feature only functions
for Dolby Digital sources.
• M/S (Main/Sub)
Sound of the main language will be output through
the front left speaker and sound of the sub language
will be output through the front right speaker
simultaneously.
• M (Main)
Sound of the main language will be output.
• S (Sub)
Sound of the sub language will be output.
• M+S (Main + Sub)
Mixed sound of both the main and sub languages will
be output.
Advanced settings
GB01COV_HTR-210SS-CEL.book Page 28 Wednesday, May 18, 2005 10:15 AM