Samsung SPP 2040 - Manual (Page 21)

3.3
Printing images
If you can see images on the display panel, select one and print it.
1
Insert the memory card.
For details about inserting memory cards, see page 3.2-Inserting memory
cards.
2
Press the Left and Right buttons to
select an image from those on the
display panel.
The image number displays in the bottom
right corner.
Images in file formats not supported by the
printer are not displayed and cannot be
printed.
3
Press the Up and Down buttons to
select the number of copies to print.
If you want to print a single copy, just press
the Print button.
The number of copies you have selected
displays in the upper left corner.
To apply various effects, see page 3.9-
Setting various effects. To select additional
printing or printer functions, see page 3.10-
Setting additional functions.
4
Press the Print button and press it
again to start printing.
After printing, the number of copies to
print reverts to ‘0.’
Insert one memory card only.
When a paper jam occurs during printing, do not pull out the jammed paper.
After turning the power off and then on again, the jammed paper should
come out automatically.
If you remove the memory card while printing a job, the printing job will be
canceled.
When you press the Cancel button
to cancel a printing job or if a paper
jam occurs, one page of the ribbon
cartridge’s life is used, even if an
image is not completely printed.
x3 : 4
9/9
Image Number
Copies
x3 : 4
9/9
x3 : 4
Print
Cancel