Samsung SPP 2040 - Manual (Page 38)

5.4
Installing the program for Windows
Installing the program
1
Quit all programs.
2
Turn on your PC and click 'Cancel' when the 'Found New
Hardware Wizard' screen appears.
3
Insert the supplied software program CD(label-side up) into
into your CD-ROM drive.
The installation window appears.
If the installation window does not appear, eject the CD-ROM and insert it
again. Or click 'Start' and then 'Run.' Type X:setup.exe, replacing 'X' with the
letter of your drive and click OK.
4
Select 'Typical'.
If you select 'Typical,' 'Printer,' 'Photothru' and 'Status Monitor' are all installed.
If you want to install only selected functions, select ‘Custom.’
If your printer is not already connected to the computer, the
following window opens.
Connect your printer to the computer and turn the machine on.
Then click 'Next.'
◀ Windows XP screen
◀ Windows XP screen