Sony MHC-RV800D - Manual (Page 19)

DVD/VIDEO CD/CD/MP3
19 GB
To Do this
Notes
• Depending on the DVD or VIDEO CD, some
operations may be prohibited.
• 2 channel sound is heard when using headphones
(MHC-GX90D and RV800D only).
Playing a track by entering the track
number (on the remote only)
Press the number button(s) on the remote to
enter the track number of the track you want to
play. (To enter the MP3 track number, press
ALBUM – or + repeatedly to select the desired
album before entering the number.)
To enter a track number over 10
1 Enter the corresponding digits.
To enter 0, press 10/0.
2 Press ENTER.
Example:
To play track number 30, press 3 and 10/0, then
press ENTER.
To play MP3 track number 100, press 1, 10/0 and
10/0, then press ENTER.
Select an album
of MP3 Press ALBUM – or + repeatedly
after step 3.
Change the
playback speed*
1
(Slow-motion
Play) (DVD/
VCD only)
During pause, press SCAN/SLOW
or * 3 on the remote. Each
time you press the button, the
speed switches between two
slowed play speeds. To return to
Normal Play, press hH (or
nN on the remote).
Select a disc in
stop mode Press one of the DISC 1 – 3
buttons or DISC SKIP/EX-
CHANGE (or DISC +/– on the
remote).
Switch to DVD
function from
another source Press one of the DISC 1 – 3
buttons (Automatic Source
Selection).
Exchange other
discs while
playing Press DISC SKIP/EX-CHANGE.
Remove a disc Press Z OPEN/CLOSE.
* 1 There may be some disturbance in the video
image.
* 2 except for MP3
* 3 When playing a VIDEO CD, you can only scan
with SCAN/SLOW
. Pressing the button
repeatedly does not change the speed.