Sony MHC-RV800D - Manual (Page 43)

Tuner
43 GB
3
Press TUNER MEMORY.
A preset number appears in the display.
The stations are stored from preset number
1.
Preset number
4
Press . or > (or PRESET – or + on
the remote) repeatedly to select the
desired preset number.
5
Press ENTER.
6
Repeat steps 1 to 5 to store other
stations.
Setting presets through
manual tuning
1
Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2
Press – or + (or TUNING – or + on the
remote) repeatedly to tune in the
desired station.
3
Press TUNER MEMORY.
A preset number appears in the display.
The stations are stored from preset number
1.
4
Press . or > (or PRESET – or + on
the remote) repeatedly to select the
desired preset number.
5
Press ENTER.
6
Repeat steps 1 to 5 to store other
stations.
Tuner
Automatically tune in
all of the stations that
can be received in
your area and then
store them manually Automatic Tuning Preset
Manually tune in and
store the radio
frequency of your
favorite stations Manual Tuning Preset
Setting presets through
automatic tuning
1
Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2
Press and hold – or + (or TUNING – or +
on the remote) until the frequency
indication starts to change, then
release it.
Scanning stops automatically when the
system tunes in a station. “TUNED” and
“STEREO” (for an FM stereo program)
appear.
If “TUNED” does not appear and the
scanning does not stop
Set the frequency of the desired radio
station as described in steps 2 through 6 of
“Setting presets through manual tuning”.
Presetting radio stations
You can preset up to 20 FM stations and 10
AM stations. You can then tune in any of those
stations simply by selecting the corresponding
preset number.
There are two ways to store the station presets.
To Method
continued