Sharp SCL901 - Manual (Page 43)

Advanced Recording
ENGLISH
39
Setting the PROGRAM AE(Automatic Exposure) mode
1. Set the power switch to CAMERA mode. (see page 18)
2. Press the P.AE button, the ( ) symbol will be displayed.
3. Press the P.AE button until the appropriate symbol is displayed.
( ➔ ➔ ➔ ➔ )
■ No Display : Auto mode.
Notes:
■ The screen status that is changed by the P.AE button will be recorded on the tape.
■ To end the P.AE function, press the P.AE button once or several times, until the P.AE Icon is no longer displayed.
■ The P.AE function will not operate in EASY or CUSTOM mode.
■ The BLC function will not operate in P.AE mode.
STBY
0:00:00
JAN. 31, 2004
00732M SCL901 SEA (20-45) 12/26/03 10:45 AM Page 39