Sanyo CLT-U22 - Manual (Page 16)

16
This phone receives and displays incoming call information transmitted by your
local phone company, provided you subscribe to Voice Mail, Caller ID, and/or Call
Waiting services. This information can include the phone number and/or the name,
date and time. The phone can store up to 40 calls for later review.
Caller ID with Call Waiting
When you subscribe to Caller ID with Call Waiting (Visual Call Waiting TM ) service
from your phone company, you are able to see who is calling when you hear the
Call Waiting beep. Caller identification information appears on screen after you
hear the beep.
Press the FLASH/PROG key to put the current call on hold so that you can
answer the incoming call. The following information will display.
1. Time
2. Date
3. Number of calls received
4. Phone number
5. Name
To return to the first call, press FLASH/PROG again.
IMPORTANT: To use these features you must subscribe to Caller ID with Call
Waiting Service.
CALLER ID FEATURES
BASICS
Voice mail indicator
When you subscribe to a voice mail service offered by your phone company, the
phone alerts you when voice mail has been received. MESSAGE WAITING
appears on screen for 60 seconds when a voice mail is received. The LED on the
base flashes to indicate there is a voice mail waiting. After the voice mail has
been reviewed, MSG WAITING OFF appears on screen, and the indicator stops
flashing.
Note: The indicator does not work with your answering machine. The phone will
only work with an FSK type of VMWI System. It will not work with the Stutter Dial
Tone type of VMWI System.