Sanyo PLC-WL2503 - Manual (Page 13)

13
Positioning the Projector
For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the
screen. The projector will focus at distance from 2.09' to 3.93' (63.6 cm to 119.7 cm).
Installation
 Note:
• This projector is not equipped with an optical zoom. To adjust the screen size, change the throw distance.
• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient
lighting in order to obtain the best image.
• All measurements are approximate and may vary from the actual sizes.
Adjustable Feet
Projection angle can be adjusted up to 10.0 degrees with the
adjustable feet.
Rotate the adjustable feet and tilt the projector to the proper
height; to raise the projector, rotate the both feet clockwise.
To lower the projector or to retract the adjustable feet, rotate
the both feet counterclockwise.
To correct keystone distortion, press the KEYSTONE
button on the remote control or on the top control or select
Keystone from the menu (see pages 23, 46).
Adjustable Feet
ā
ā
ā
$
3.93' (119.7 cm)
2.83’ (86.1 cm)
2.09’ (63.6 cm)
(Inch Diagonal)
Screen Size
(W x H) mm
16:10aspect ratio
60” 80” 110”
1292 x 808 1723 x 1077 2369 x 1481
Throw distance 2.09’ (63.6 cm) 2.83’ (86.1 cm) 3.93' (119.7 cm)
A 7.9” (20.0 cm) 9.7” (24.5 cm) 12.3” (31.3 cm)