Samsung 835P - Manual (Page 7)

I NSTALLING S OFTWARE 1 . 4
Installing Samsung Software
N OTES :
• If you are using a USB cable, you must be running Windows 98/
Me/2000/XP. Windows 98 or Me and connect the printe rusing
the USB cable, you must install the Samsung USB driver before
proceeding to install the Samsung software. see “Installing USB
Driver for Windows 98/Me” on page 1.11.
• Make sure that your product is plugged in and connected to your
computer’s parallel port or USB port before installing
software from the CD. Windows 95 and Windows NT 4.0 do not
support USB connection.
1
If the “New Hardware Found” screen appears when the
computer boots up, click
Cancel .
2 Insert the supplied SmarThru CD-ROM into your CD-ROM
drive.
The SmarThru CD-ROM should automatically run and
opening window appears.
If the opening window does not appear, click Start , and
then Run . Type X:Autorun.exe , replacing “ X ” with the
letter of your drive, and click OK .
3 If you are asked to select the model name, click MFP 830
series .