Sharp MD-M1H - Manual (Page 22)

21
(Continued)
2,3
1
1
2,3
4,6
4,6
5
5
5
Within 6 seconds, press the PRESET (
X
or
W
)
button to select a desired station name you want.
● Each time the button is pressed, the station name
will appear. If the button is held down for more
than 0.5 seconds, the station name will continu-
ously change.
6
Whilst the selected station name is flashing
(within 6 seconds), press the STATION button
again.
kHz
● After the selected station name has been lit for 1
second, the preset station which corresponds to
the selected station name will be recalled.
To cancel the station select operation:
Press the STATION button whilst "STATION" and
"SELECT" appear alternately.
■ To specify station names and select
stations manually (station select)
You can select a desired station by specifying the
station name (BBC R1, BBC R2, etc.) from among
the stations that have been stored in memory.
(ASPM is convenient for storing stations in memory.)
Before starting this operation, you must store one
or more station names in memory.
1
Press the ON/STAND-BY button to turn the
power on.
2
Press the TUNER (BAND) button.
3
Press the TUNER (BAND) button to select the
FM ST or FM band.
4
Press the STATION button.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
REC kHz
MHz SLEEP
● "STATION" and "SELECT" will appear alternately
for about 6 seconds.