Sony RDR-HX1000 - Manual (Page 90)

90
Scart Setting
Sets the method of inputting/outputting signals
from the SCART jacks on the rear panel of the
recorder. Select an option for each of the items
below according to the combination of jacks and
methods that you are going to use.
◆Line1 Output
Selects a method of outputting video signals for
the LINE 1-TV jack.
Notes
• If your TV does not accept S-video or RGB signals, no
picture appears on the TV screen even if you select “S
Video” or “RGB.” See the instructions supplied with
your TV.
• You cannot select ”RGB” when “Component Out”
above is set to “On.”
• SMARTLINK is available only when “Video” is
selected.
◆Line3 Input
Selects a method of inputting video signals for the
LINE 3/DECODER jack. The picture will not be
clear if this setting does not match the type of
video input signal.
◆Line3 Output
Selects a method of outputting video signals for
the LINE 3/DECODER jack.
Line4 Input
Selects a method of inputting video signals for the
LINE 4 IN jack on the rear panel of the recorder.
RGB Outputs RGB signals.
Video Outputs video signals.
S Video Outputs S-video signals.
Video/RGB Inputs video signals or RGB
signals.
Decoder Select this when connecting to a
PAY-TV/Canal Plus decoder.
S Video Inputs S-video signals.
Video Outputs video signals.
S Video Outputs S-video signals.
Video Inputs video signals.
S Video Inputs S-video signals.