D.s.c. recording, Basic shooting (d.s.c. snapshot), Continuous shooting – JVC GR-X5U User Manual

Page 25: Bracket shooting, Digital still camera (d.s.c.) recording & playback, 25 bracket shooting, Pg. 25, 3, Pg. 25), Pg. 25

Advertising
background image

EN

25

MasterPage: Start_Right

D

IGIT

A

L

STILL CAMER

A (D.S

.C.) R

E

CO

RD

ING

& PLA

Y

BACK

D.S.C. RECORDING

You can use your camcorder as a Digital Still
Camera for taking snapshots. Still images are
stored in the memory card.

NOTE:

Before continuing, perform the procedures listed
below:

Power (੬ pg. 13)

● Loading a Memory Card (੬ pg. 17)

1

Remove the lens cap.

2

Open the LCD monitor fully. (

੬ pg. 12)

3

Set the VIDEO/MEMORY switch to

“MEMORY”.

4

Set the power switch to “A” or “M” while

pressing down the lock button located on the
switch.

● To change the image size and/or picture quality,

੬ pg. 33, 36, 37.

5

Press SNAPSHOT. The “O” indication

appears while the snapshot is being taken.

● Still images are recorded in the snapshot mode

with no frame.

● To delete unwanted still images, refer to “Deleting

Files” (

੬ pg. 29).

● When you do not want to hear the shutter sound,

set “BEEP” to “OFF”. (

੬ pg. 33, 35)

NOTES:

● If shooting is not performed for approx. 5 minutes

when the power switch is set to “A” or “M” and
power is supplied from the battery pack, the
camcorder shuts off automatically to save power.
To perform shooting again, close and re-open the
LCD monitor.

● For approximate number of storable images, see

page 61.

Continuous Shooting

Keeping SNAPSHOT pressed in step

5 provides

an effect similar to serial photography.

To use this function, set “C SHOOTING” to “ON”.
(

੬ pg. 33, 37) The

indicator appears.

Bracket Shooting

In addition to an image with the exposure
automatically set by the camcorder, two other
images are recorded with exposure values
shifted to the +0.3EV and –0.3EV sides. You can
select the image that has a suitable exposure
after shooting.

1

Set “C SHOOTING” to “BRACKET”.

(

੬ pg. 33, 37) The

indicator appears.

2

Set the VIDEO/MEMORY switch to

“MEMORY”.

3

Set the power switch to “A” or “M” while

pressing down the lock button located on the
switch.

4

Press SNAPSHOT for bracket shooting.

● Three images are recorded.

To cancel bracket shooting mode
Set “C SHOOTING” to “OFF” in step

1.

Basic Shooting (D.S.C. Snapshot)

A

Power Switch

Lock Button

VIDEO/MEMORY

SNAPSHOT

Standard
exposure

Decreased
exposure

Increased
exposure

DIGITAL STILL CAMERA (D.S.C.) RECORDING &
PLAYBACK

GR-X5US.book Page 25 Thursday, April 7, 2005 8:13 AM

Advertising