Simplicity ZT2148T - Manual (Page 29)

Troubleshooting, Adjustment & Service
25 00
C
Figure 25. Cutting Height Adjustment
A. Cutting Height Adjustment Pin
B. Deck Lift Foot Pedal
C. Cutting Height Selection Decal
B
CUTTING HEIGHT ADJUSTMENT
The cutting height adjustment pin (A, Figure 25) controls
the mower cutting height. The cutting height is
adjustable between 1-1/2” (3.8cm) and 4-1/2” (11.4cm)
in 1/4” (.64cm) increments.
Depress the deck lift foot pedal (B, Figure 25), placing
the majority of the force on the top edge of the pedal
until it locks into the “TRANSPORT” position. Place the
cutting height adjustment pin in the desired cutting
height. Depress the deck lift foot pedal, placing the
majority of the force on the bottom edge of the pedal to
release the pedal from the “TRANSPORT” position.
A