Sony ZS-BT1 - Manual (Page 12)

12
Actual total number: Sony GU-BT1 (US) 2-067-182-01 (1)
MARK
Other functions
MARK function
The MARK function records your current location. When you press the MARK
button, a beep is emitted, then positioning information (date, hour, latitude and
longitude) of your current location is recorded in the memory of this unit. The
maximum number of points that can be recorded is 16.
Tips
• This unit can only record up to 16 MARK information points. When the limit is reached,
to record a new MARK information point, you must delete all the MARKs, and then
record a new MARK. To delete all the MARKs, press the MARK button on the unit for
more than 3 seconds. All recorded MARK information points are deleted. (We
recommend saving the MARK information points on your CLIÉ handheld.)
• If the MARK information fails to record, the GPS/BATT LED alternately blinks green and
orange 4 times. Press the MARK button again to record the information.
• You can determine the recording status by the beep emitted.
– MARK information recording: 3 short beeps
– MARK information unable to record: 5 short beeps
– MARK information deleting: 1 short beep and 1 long beep
MARK button
POWER ON/OFF STANDBY switch