SMC Networks EZ Connect Antenna Ceiling Box Kit - Manual (Page 2)

EZ Connect 2.4GHz High Gain Antenna Ceiling Box Kit Installation Instruction
Using supplied velcro,
attach your radio to the
bottom (silver) of the box.
Make sure the connectors
are facing the center of the
box.
Amplifier
Access Point
POE Remote Unit
Amplifier
Access Point
POE Remote Unit
Amplifier Amplifier
Access Point Access Point
POE Remote Unit POE Remote Unit
Amplifier
Access Point
POE Remote Unit
Amplifier Amplifier
Access Point Access Point
POE Remote Unit POE Remote Unit
If your radio is Power over
Ethernet, skip this step.
Using the permenently
attached power cable on the
POE Remote unit, plug in
power to your radio.
Using the supplied ethernet
cable, attach the ethernet input
to your radio with the ethernet
output from the amplifier.
Amplifier
Access Point
POE Remote Unit
Amplifier Amplifier
Access Point Access Point
POE Remote Unit POE Remote Unit
Amplifier
Access Point
POE Remote Unit
Amplifier Amplifier
Access Point Access Point
POE Remote Unit POE Remote Unit
Attach the antenna cable to
your radio. The other end will
need to be attached to the
amplifier.
SMCANT-CEILINGBOX Ceiling Mounted Wireless Solution
will come to you fully configured and wired for you to add
your own radio, e.g. SMC2482W. Simply remove the top of
the box by removing the 6 screws on the sides.Be careful
removing the lid, as the top and bottom have connecting
cables.
Re-attach the top of the
box by replacing the 6
screws on the outside
edge.
Attach the box to the
mounting arms using the
supplied 4 machine screws.
Place the Ceiling box with
mounting arms above a ceil-
ing tile. Make sure to follow
local building codes, and
attach a safety chain to se-
cure the box.
Attach an Ethernet connec-
tion. Make sure that the
Ethernet connection has
Power Over Ethernet (POE)
applied. (See 9 below)
• Install Power Supply, 24 V ,2.5 Amp(1)
• Connect Category 5 cable input (3)
• Connect Category 5 cable to ceiling box (2)
POE Injector POE Injector