Standard Horizon PHANTOM PS1000 - Manual (Page 51)

Page 51 Phantom PS1000
12.6 SCAN TYPE
This selection selects which is the scanning feature start the “Memory Scan
(M-SCAN)” or “Priority Scan (P-SCAN)” when pressing the [SCAN] key. De-
fault setting is level “Memory Scan (M-SCAN).”
1. Press and hold down the [CALL(SET)MENU] key until
“ RADIO SETUP ” menu appears.
2. Press the [CALL(SET)MENU] key, then press the [ ] or
[ ] key to select “ SCAN TYPE ” menu.
3. Press the [CALL(SET)MENU] key.
4. Press the [
] or [ ] key to select “ MEMORY ” or “ PRIOR-
ITY .”
5. Press the [CALL(SET)MENU] key to store the selected set-
ting.
6. Press the [16/9] key to return to radio operation.
12.7 KEY BEEP (ON/OFF)
This selection allows the beep tone when a key is pressed to be turned off.
Default setting is “on.”
1. Press and hold down the [CALL(SET)MENU] key until
“ RADIO SETUP ” menu appears.
2. Press the [CALL(SET)MENU] key, then press the [ ] or
[ ] key to select “ KEY BEEP ” menu.
3. Press the [CALL(SET)MENU] key.
4. Press the [
] or [ ] key to select “ on ” or “ of (off).”
5. Press the [CALL(SET)MENU] key to set the beep condi-
tion.
6. Press the [16/9] key to return to radio operation.
NOTE
Emergency alarm cannot be turned OFF.